|
| SSG-6038R-E1CR16L | - SuperServer 6038R-E1CR16L (Black)
|
| | |
| CPU | - Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
| | Cores / Cache | - Up to 18 Cores / Up to 45MB Cache
| | System Bus | | | Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| | |
| Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
| | Memory Type | - 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
| | DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
|
| | |
| Chipset | | | SAS | - SAS3 (12Gbps) via LSI 3008, IT mode
| | SATA | - SATA3 (6Gbps) with RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| | Network Controllers | - Dual 10GBase-T LAN with Intel® X540 Ethernet Controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | |
| | |
| LAN | - 2x RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x USB 3.0 ports (rear)
- 2x USB 2.0 ports (rear)
- 1x Type A
| | VGA | | | Serial Port / Header | - 1x Fast UART 16550 port / 1 Header
|
| | | |
| Width | | | Height | | | Depth | | | Weight | - Gross Weight: 79 lbs (35.8 kg)
- Net Weight: 48 lbs (21.8 kg)
| | Available Colors | |
| | |
| Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| | |
| PCI-Express | - 1 PCI-E 3.0 x16 slot
- 3 PCI-E 3.0 x8 slots
- Slot 3 & 4 occupied by controller and JBOD Expansion Port
|
| | |
| Hot-swap | - 16x 3.5" Hot-swap SAS3/SATA3 Drive Bays
| | Optional OS Drive | - 2x 2.5" optional rear Hot-swap 2.5" Drive Bays
|
| | |
| SAS3 12Gbps single expander backplane, w/ 16x SAS3 3.5" drive slots and 2x mini-SAS HD connectors for JBOD expansion |
| | |
| Fans | - 2x 80mm hot-swap rear exhaust cooling fans
- Redundant cooling
|
| | |
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | | AC Input | - 100-240 V, 50-60 Hz, 11-4.5 Amp
| | DC Output | - 4 Amp @ +5V standby
- 75 Amp @ +12V
| | Certification |   Platinum Certified
|
| | |
| BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | |
RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
