|
| MBD-X10DAi -B | | | MBD-X10DAi -O | |
| | |
| Form Factor | | | Dimensions | - 12" x 13" (30.5cm x 33.0cm)
|
| | |
| CPU | - Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP **)
- Dual Socket R3 (LGA 2011)
| | Cores / Cache | - Up to 18 Cores / Up to 45MB Cache
| | System Bus | | | Note | - ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
|
| | |
| Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
| | Memory Type | - 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
| | DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
|
| | |
| Chipset | - Intel® C612 Express chipset
| | AHCI SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
| | SCU SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
| | Network Controllers | - Intel® i210 Dual Port Gigabit Ethernet
- Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Audio | - RealTek ALC888 7.1 High Definition Audio with S/PDIF header
|
| | |
| SATA | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
| | USB | - 6x USB 3.0 ports (4 rear + 2 via header)
- 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
| | Audio | - 7.1 HD Audio with optical S/PDIF
| | DOM | - 2x SuperDOM (Disk on Module) ports
| | TPM | |
| | |
| 2U Chassis: | - SC213A-R740LPB
- SC826BA-R920LPB
| | 3U Chassis: | - SC835BTQ-R1K28B
- SC835TQ-R920B
- SC836BA-R1K28B
- SC836BA-R920B
| | Mid/Mini Tower Chassis: | | | 4U / Tower Chassis: | - SC743TQ-1200B
- SC745TQ-R920B
- SC747TG-R1400B-SQ
- SC846BA-R920B
| | Important Chassis Notes | - To support the new generation Intel®
Xeon® processor-based motherboards,
Revision M chassis is recommended.
Please talk to your sales representative for details.
|
| | |
| PCI-Express | - 3 PCI-E 3.0 x16
- 2 PCI-E 3.0 x8
- 1 PCI-E 2.0 x4 (in x8)
|
| | |
| BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| | |
| Software | - NMI
- SuperDoctor® 5
- Watch Dog
| | Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
| | |
| Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, +3.3V Standby, VBAT, Memory Voltages.
- 6 Phase-switching voltage regulator
| | FAN | - 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| | |
| Operating Temperature Range | - 10°C - 35°C (50°F - 95°F)
| | Non-Operating Temperature Range | - -40°C - 70°C (-40°F - 158°F)
| | Operating Relative Humidity Range | - 8% - 90% (non-condensing)
| | Non-Operating Relative Humidity Range | - 5% - 95% (non-condensing)
|
|
