|
| SYS-6047R-TXRF | - SuperServer 6047R-TXRF (Black)
|
| | |
| CPU | - Intel® Xeon® processor E5-2600
- Dual Socket R (LGA 2011)
| | Cache | | | System Bus | |
| | |
| Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 192 GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| Chipset | | | SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Video | | | Super I/O | |
| | |
| SATA | - 2x SATA 3.0 ports (6Gbps)
- 8x SATA 2.0 ports (3Gbps)
| | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 10x USB 2.0 ports total
(4x rear + 4x via header + 2x Type A)
| | Video | | | Serial Port / Header | - 2x Fast UART 16550 ports (1 rear + 1 header)
|
| | |
| PCI-Express | - 10x PCI-E 3.0 x8
- 1x PCI-E 2.0 x4 (in x8)
|
| | |
| BIOS Type | - 128Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | |
| Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
| | Model | |
| | |
| Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
| | Ports | |
| | |
| Hot-swap | - 5x 3.5" Hot-swap Drive Trays
| | Peripheral Bay(s) [90o Rotatable] | - 3x 5.25" Peripheral Drive Trays
|
| | |
| SAS / SATA Hard Drive Backplane w/AMI MG9072 |
| | |
| Fans | - 1x 92x38mm 4-pin PWM front intake fan
- 2x 80x38mm 4-pin PWM rear exhaust fans
|
| | |
| 600W high-efficiency redundant power supplies with PMBus | | AC Input | - 100-240 V, 50-60 Hz, 7.5-3.0 Amp
| | DC Output | - 3 Amp @ +5V standby
- 50 Amp @ +12V
| | With Power Distributor | - +5V: 30 Amp
- +3.3V: 28 Amp
- -12V: 0.6 Amp
| | Certification |  
Platinum Certified
[ Test Report ] |
| | |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| | FAN | - Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | |
RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|