| | |
| Form Factor | | | Dimensions | - 12" x 9.6", (30.5cm x 24.4 cm)
|
| | |
| CPU | - Intel® Xeon® processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
| | |
| Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| Chipset | | | SATA | - SATA3 (6Gbps) w/ RAID 0, 1
- SATA2 (3Gbps) w/ RAID 0, 1, 10, 5
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Aspeed AST2400 BMC
| | Network Controllers | - Intel® i210AT Controller
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
| | VGA | - BMC integrated Aspeed AST2400
|
| | |
| Serial ATA | - 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
| | LAN | - 2x Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x USB 3.0 ports (1 Type-A, 1 via header)
- 6x USB 2.0 ports (4 rear, 2 via header)
| | VGA | | | Serial Port / Header | - 2x COM ports (1 rear, 1 header)
| | DOM | - SATA DOM (Disk on Module) power connector support
| | TPM | |
| | |
| 3U Chassis | | | Mid-Tower | - CSE-731i-300B
- CSE-732D4-500B
- CSE-732D4-865B
- CSE-732i-500B
- CSE-733TQ-500B
- CSE-733TQ-665B
| | Important Chassis Notes | - To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
|
|
| PCI-Express | - 1x PCI-E 3.0 x16 slot
- 1x PCI-E 2.0 x4 (in x8) slot
| | PCI | |
| | |
| BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
| | |
| Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
| | Power Configurations | - ACPI / APM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
|
| | |
| Voltage | - Monitors for CPU Cores, +12V, +3.3V, +5V Standby, VBAT, Memory, Chipset Voltages.
- 3-Phase-switching voltage regulator with auto-sense from 1.5V-1.86V
| | FAN | - Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
